Home > Guitar > Guitar Pedals & Effects > Pedal Power Supplies >

G-Lab PB-1 8 Separated 9V Power Box PB-1

G-Lab PB-1 8 Separated 9V Power Box PB-1

Alternative Views:

Our Price: $299.95

Product Code: PB-1

Description Technical Specs
PB-1 is the power supply for guitar effects with regulated 9V direct current (DC). It has eight full galvanically separated outputs which enable to built professional guitar systems without ground loops and crosstalks. SMPS (Switching-Mode Power Supply) technology is applied in the PB-1. The Power Supply does not generate the hum even if it is placed close to the other effects (especially Wah Wahs having inductors).

PB-1 enables also to obtain voltages 12V, 15V DC using adapters offered by G LAB and 18V DC using simple to ‘do it yourself adapter.

PB-1 is worldwide voltage compatible (nominal line voltage from 100V to 230V) by connecting the mains cable (attached to the packet) with a connector appropriate for a given country. PB-1 could be fix as well in a pedalboard as in a Rack systems using the GLAB 1U RMS FRONT PANEL.

Thanks to applied in the PB-1 SMPS technology:
  • PB-1 has no typical mains transformer which generates electromagnetic field interferences received by other devices situated near to it (e.g. inductors in the wah-wah effect),
  • DC output voltage is guaranteed in the range from 100V to 240V line voltage,
  • there is high output power in proportion to small size and weight.
It is possible to switch the voltage polarization in outputs no. 4 and 8. The PB-1 package contains labels for cables describing. Showing polarization, energy flow and voltages makes easier to organize the pedalboard and reduce the likehood of effects’ damage caused by faulty connection.
  • eight full separated outputs with regulated 9V DC current ,
  • two sections 1000 mA each (under the condition of not passing 0,35A for each output),
  • shortcut circuit protection,
  • guaranteed DC output voltage in the range from 100V to 240V line voltage,
  • POWER and POWER FAIL indicators,
  • switchable polarization in outputs no. 4 and 8 (1,2,3,5,6,7 have permanently CTR- ),
  • solid, powder-coated casing,
  • possibility of installing in a Rack systems.
The packet with PB-1 power supply also contains:
- Mains cable for power supply PB-1
- Cables for effects power supply: 9V 40 cm (2 pcs), 9V 80 cm (4 pcs.), 9V 120 cm (2 pcs)
- M3 screws for fixing PB-1 in rack 19” systems (4 pcs)
- Velcro fasteners for fixing PB-1 (4 pairs)
- Heat shrink tubes for linking wires ‘do it yourself’ (10 pcs)
- Cable labels for marking cables which serves to effects feeding (30 pcs)

Share your knowledge of this product. Be the first to write a review »