Home > FOH > Microphones > Shure > SM87A Vocal Microphone
	List Price: $279.00 Our Price: $230.00 Savings: $49.00 Product Code: SM87A Qty:

Description Technical Specs   The Shure SM87A microphone is a professional-quality, handheld condenser microphone for use in sound reinforcement, broadcasting, and studio recording installations. Its supercardioid polar pattern provides greater rejection of unwanted sound sources, making it ideal for miking individual instruments in a multi-microphone setting or for miking single sources in a reverberant or noisy environment. An integral three-stage wind and pop filter protects against wind and breath noise. Its built-in shock mount reduces stand and handling noise. Cartridge Type Condenser (electret bias)   Frequency Response 50 to 20,000 Hz     view larger   Polar Pattern Supercardioid   Output Impedance Rated at 150 ohms (100 ohms actual +/- 20%) Recommended minimum load impedance: 800 ohms   Sensitivity (at 1,000 Hz) Open Circuit Voltage: -52.5 dBV/Pa (2.4 mV) (1 Pa = 94 dB SPL)   Clipping Level (at 1,000 Hz) 1000 ohm Load: -6 dBV (0.5 V)   Maximum SPL (at 1,000 Hz) 140.5 dB (0.25% THD, 1000 ohm load)   Self-Noise (equivalent sound pressure level; measured with true rms voltmeter) 24 dB typical, A-weighted 26 dB typical, weighted per DIN 45 405   Dynamic Range 116.5 dB (maximum SPL to A-weighted noise level)   Signal-to-Noise Ratio 70 dB at 94 dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and product's equivalent self noise (SPL A-weighted).   Polarity Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3.   Power Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3. Current Drain: 1.0 to 1.2 mA   Connector Three-pin (XLR) professional audio.   Case Aluminum construction with steel grille and satin black finish.   Dimensions See User Guide.   Net Weight 200 grams (7 oz) Features Highly directional supercardioid pickup pattern Controlled low-frequency roll-off Very low RF and magnetic hum susceptibility Minimally affected by varying load impedance Built-in wind and pop filter Transducer element shock mounted Rugged construction for outstanding reliability Field-usable over a wide range of temperature and humidity conditions Accepts a wide variety of phantom power sources, including DIN 45 596 voltages of 11 and 52 Vdc Related Items SM7B Vocal Microphone SM86 Vocal Microphone SM137 Condenser Instrument Microphone SM27 Multi-Purpose Condenser Microphone Our Price: $399.00 Our Price: $179.00 Our Price: $179.00 Our Price: $299.00 Super 55 Deluxe Vocal Microphone SM58S Vocal Microphone With On/Off Switch KSM353 Premier Bi-directional Ribbon Microphone Beta 91A Half-Cardioid Condenser Microphone Our Price: $249.00 Our Price: $104.00 Our Price: $2,695.00 Our Price: $249.00

Share your knowledge of this product. Be the first to write a review »